Venturi flowmeter

DP flowmeter for the highest requirements of accuracy and long-term stability

  • For acceptance testing, billing, reference measurement of steam, feedwater, hydrocarbons etc.
  • Machined or welded and internally machined design acc. to EN ISO 5167 and ASME MFC-3M; low remaining pressure loss
  • Manufacturing capability up to 48”; inhouse calibration also for applications with high Reynolds numbers
  • Complete scope of supply from one source, incl. engineering, documentation, testing, calibration, valves, Venturi, process instrumentation, etc.

Venturi flowmeter

DP flowmeter for the highest requirements of accuracy and long-term stability

  • For acceptance testing, billing, reference measurement of steam, feedwater, hydrocarbons etc.
  • Machined or welded and internally machined design acc. to EN ISO 5167 and ASME MFC-3M; low remaining pressure loss
  • Manufacturing capability up to 48”; inhouse calibration also for applications with high Reynolds numbers
  • Complete scope of supply from one source, incl. engineering, documentation, testing, calibration, valves, Venturi, process instrumentation, etc.

Related products

OPTICHECK Pressure Mobile

Mobile app for pressure transmitters

  • Works with all OPTIBAR PM 5060, OPTIBAR PC 5060 and OPTIBAR DP 7060 equipped with Bluetooth display and adjustment module
  • Wireless device commissioning, verification and monitoring even in hard-to-reach areas
  • Parameterisation similar to PACTware DTM including remote SIL mode activation
  • Free download for iOS and Android

OPTIBAR FC 1000

Flow computer for process control of liquids, gases and steam

  • High performance flow and energy calculation with DP flow elements, volumetric or mass flowmeters
  • Compact design, quick and easy-to-operate via TFT touch screen
  • Enables split-range operation with two pressure transmitters for increased measuring dynamics
  • HART® communication with all common DP transmitters for loss-free measured data transmission and possibility of automatic zero point adjustment

OPTIBAR PM 3050

Pressure transmitter for general pressure and level applications

  • Compact design with recessed or flush metallic diaphragm and optional display module
  • 0.1…100 bar / 1.45…1450 psi
  • Thread: G½, ½ NPT (male, female)
  • 2-wire 4…20 mA/HART®

OPTIBAR DP 3050

Differential pressure transmitter for general flow, level and differential pressure applications

  • The most compact design in its class
  • Measuring ranges: 100 mbar…16 bar / 1.45…232 psi; Line pressure: up to 160 bar / 2320 psi
  • Reference accuracy ± 0.1%
  • 2-wire, 4…20 mA/HART®7

OPTIBAR PC 5060

Pressure transmitter for advanced process pressure and level applications

  • Robust design, with corrosion and abrasion resistant ceramic diaphragm
  • 25 mbar…100 bar / 0.73…1450 psi; max. +150°C / +302°F
  • Various threads, flanges, hygienic and other connections
  • 2-wire, 4…20 mA, HART®, FF, Profibus-PA, Bluetooth®

OPTIBAR PM 5060

Pressure transmitter for process pressure and level applications

  • Rugged design with fully welded metallic diaphragm suited to high pressure ranges and hygienic requirements
  • 100 mbar…1000 bar / 1.45…14500 psi
  • Various threads, flanges, aseptic and other connections
  • 2-wire 4…20 mA/HART®, FF, Profibus-PA, Bluetooth®

OPTIBAR DP 7060

Differential pressure transmitter for flow, level, differential pressure, density and interface measurements

  • High performance DP transmitter with integrated line pressure measurement
  • Measuring range: 30 mbar…16bar / 0.44…232 psi; Line pressure: up to 700 bar / 10,153 psi
  • Reference accuracy of ±0.065%
  • 2-wire, 4…20 mA/HART®, FF, Profibus-PA, Bluetooth®

Venturi tube

Engineered primary element for DP flow measurement of liquids, gases and steam with the lowest residual pressure loss

  • Machined or welded design (internally machined) according to EN ISO 5167, ASME MFC3
  • Lowest residual pressure loss of all DP elements
  • Only short inlet/outlet runs required
  • From basic to special wet gas applications and high pressure conditions

OPTITEMP TCA-T30

Thermocouple (TC) temperature assembly for higher flow velocities and pressures

  • Weld-in connection
  • DIN-style based on form 4, barstock thermowell with tapered tip
  • -40…+600°C / +1100°F

OPTITEMP TCA-TF31

Thermocouple (TC) temperature assembly for higher flow velocities and pressures

  • Flange connection
  • DIN-style based on form 4F, barstock thermowell with tapered tip
  • -40…+600°C / +1100°F

OPTITEMP TCA-TF56

Thermocouple (TC) temperature assembly for higher flow velocities and pressures

  • Flange connection
  • ASME-style, barstock thermowell with tapered tip
  • -40…+600°C / +1100°F
Email
Contact